Replace 18-Count Display Signage

Provided in Shipment: 18-Count Signage Set

Tools Required: Pliers

1: Open the FastField mobile app (Apple or Android) and find the form specific to your store. Your username and password can be found in Field Nation under the Buyer’s Custom Fields. You will use the mobile app to take before, during and after photos while completing the scope of work.

2: Find the Primo Brand 18-Count Display (typically along the interior front wall) and take a BEFORE photo 📷 in the mobile app of the display prior to starting any work.

➡ There are many different brands of signage by Primo Brands (ie. Primo Water, Poland Spring, Deer Park, Arrowhead, etc). All instructions are exactly the same regardless of brand type that was sent to you.

3: Remove the existing signage by breaking off the push-in clips using pliers (it’s easier to break off the backside of the clip first using pliers, then remove it). If the display is adjacent to other displays or machines, you must slide it out (remove all water jugs) to replace both side panels. Remove the existing shelf strips and the velcro backing (new strips come with new backing). It’s easiest to use pliers to pull off the old backing.

4: Take a DURING photo 📷 with the signage removed from the display (a blank display).

5: Attach all new signage using the push-in clips provided. If clips are difficult to push in, a rubber mallet may be used to gently hammer in the clips (be careful, the clips can easily break).

  • Side Panels (x2): These come folded in half; unfold to install with 10 push-in clips per side. If the display is adjacent to other displays or machines, you must slide it out, then replace both side panels.

  • Shelf Strips: These must be installed in the correct order. Remove the backing and apply to the front of each shelf. Top shelf has the number “1, 2 and 3” on the strip. Middle shelf has “Learn about our water dispensers…” across the strip. Bottom shelf is straight across without the larger tags at the end of the strip.

  • 18-Count Header: Align with the holes in the top bar of the frame, then attach with 2 push-in clips.

6: Clean up the area. Dispose of the old signage in the back of the store, typically in their receiving area. If you had to remove water jugs, replace them back on the shelves.

7: Take an AFTER photo 📷 while standing 15’ back to show the overall display, then finish the form in FastField.